XRotor 4in1 ESC for FPV Racing

    XRotor ESC - 4in1 series

    Model

    60A BLHeli32-DS1200

    30x30

    40A BLHeli32-DS1200

    20x20

    Nano 20A 4in1 BLHeli-S DShot600

    20x20

    MAP $69.99 $59.99 $44.99
    SKU
    30902063 30902045 30901068
    BLHeli32 DShot1200
    BLHeli32 DShot1200 HW Special Program for FPVs
    Application
    FPVs with 130-200mm
    Diagonal Wheelbase
    Application
    FPVs with 130-200mm
    Diagonal Wheelbase
    FPVs with 150=mm
    Diagonal Wheelbase
    LiPo Power input 3-6s Lipo 3-6s Lipo 1-4S LiPo
    Cont.Current
    60Ax4 40Ax4 20A×4
    Burst Current 80Ax4 60Ax4 30A×4
    BEC Output 5V@0.6A No Bec No BEC
    Input wires
    12AWG-130mm
    Red-14AWG-100mm/ Black-14AWG-100mm 18AWG-100mm (Red/Black)
    Output Wire
    No wires but solder tabs
    No wires but solder tabs

    No wires but solder tabs

    Connectors
    (In/Out)
    XT60 (w/ Wires Soldered on) /no
    XT60 (w/ Wires Soldered on) /no no 
    Weight / Size

    15g/

    30.5x30.5mm

    12g/ 40x33x5mm 6g / 32x31.9x5.8mm

    * Note: All the wire length above is the original length, not the length you see from the outside.

    Manual Download

     60A 4in1 Manual Download

     20A 4in1 Manual Download
    Related products
    Combo available

    << see more Xrotor ESC series

     

    Important note: 

    1. Power capacitor must be installed.  Every Xrotor 45amp 4-1 includes 2 power capacitors. One larger, and one smaller.   The larger capacitor should be used for 5s-6s lipo, the smaller capacitor can be installed for 4s-5s lipo directly on the PCB (ESC), not by a power plug.  Failure to use the included power capacitors will result in damage to your ESC.

    2. BL_Heli_32 ESC settings can cause damage. Default settings should be used.

    3. Motor KV ratings and prop size/pitch combinations recommendations.
    - 4s Lipo using 5 inch props up to 2700KV
    - 5s using 5 inch props, up to 2450 KV
    - 6s using 5 inch props up to 1750 KV