Xrotor Flight Controller for FPV Racing


    Flight Controllers

    Convertible F7 $69 $49.99
    Nano F4 $44 $31.99


    Convertible F7 Nano
    31003002 31001001
    Application FPV 130-300 130 or less
    FC Programming supported same
    Programming via
    Betaflight/Cleanflight and other configurator
    Compatible with (Modes) PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc WM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300,
    Dshot600, Dshot1200, Proshot1000
    Compatible with (Transmitters) PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL, and etc. PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
    OSD Buit-in
    Voltage Monitoring Supported
    Current Monitoring Supported
    External Buzzer Supported
    LED Control Supported
    TF-card Supported no
    USB Port MicroUSB
    size/ weight 30.5x30.5mm & 20x20mm 27*27mm / 3.3g
    • XRotor F7 Flight Controller (Convertible)
      Special interface for DJI image transmission system With DJI image transmission system port, equipped with corresponding flat cable (FC has been equipped), can avoid welding, realize plug and play.

      Unique installation design and shock absorption structure The double hole distance mounting hole design (30 * 30MM & 20 * 20MM) can adapt to different frames.
      The unique flexible flat cable connection mode (The effect is better with hobbywing tower 4in1 ESC ), and the shock absorption mechanism of installation hole, can effectively reduce the impact of external vibration on FC high-sensitivity components, and make the flight more stable and accurate.

      Super hardware and running speed 
      Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor. It can perfectly support bidirectional DShot digital throttle communication. The integrated OSD chip can adjust and set each OSD parameters in FC parameter adjustment software and radio, which is simple and convenient. On-board large capacity Flash memory chip can record and store more flight logs, which is convenient for users to debug aircraft based on flight data.

      On-board 5V & 12V dual BEC circuit FMU integrates with 12V BEC circuit. It can supply super power output for image transmission and 12V LED devices.

      On-board Pit Switch module FC integrated Pit Switch module can open or close VTX by radio after being adjusted on FC parameter software. Easy and convenient.

    XRotor F4 Flight controller boards (F4 G3 / F4 Nano)

    • Super-high Running Frequency
      The STM32F405 MCU which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency. DS
    • DShot 150/300/600/1200, Oneshot125, Oneshot42, Multishot Modes Supported
      Besides the latest Dshot 150/300/600/1200 mode, the FC also supports the regular PWM mode, Oneshot125 mode, Oneshot42 mode and Multishot mode.
    • TF-card Insertion Supported
      Onboard OSD microchip allows users to easily adjust various (OSD) parameters via the Betaflight/Cleanflight software.
    • Onboard OSD Microchip
      Onboard OSD microchip allows users to easily adjust various (OSD) parameters via the Betaflight/Cleanflight software.
    • BetaFlight/Cleanflight Firmware Ready
      The FC which supports Betaflight/Cleanflight firmware & allows parameter adjustment via Betaflight /Cleanflight software is more applicable to FPV flying & racing.
    • Perfectly integrable with the Hobbywing 4IN1 ESC & VTX (video transmitter)
      It’s easy to wire and install when pairing the FC with a Hobbywing 4-in-1 tower ESC & HOBBYWING VTX (Video Transmitter).  

    Manual Download

    F7 Flight Controller Manual Download

    F4 Flight Controller G3 Manual Download

    Related Products